How to Fix Snapped Fishing Rod? Many of the activities are present in which people have fun and enjoy. But fishing is a most famous competitive activity enjoyed by people of all ages, like children, young and old.
But it can be defeated when a fishing rod snaps. A snapped fishing rod can take place due to accidents like a heavy catch and tear. With the knowledge and taking information through the right tools, you can simply fix a snapped fishing rod.
In this article, I will discuss step-by-step how to repair a snapped fishing rod and some common issues of fishing rod breakage. I will discuss the steps on how to repair a type of break as well as how to prevent breaks that take place. You can also read our blog about Our Top 5 Best Tuna Fishing Rods Review 2023.
Assessing the Damage
How to Fix Snapped Fishing Rod? The first thing in fixing a snapped fishing rod is to check out the damage. Look very closely at the breaks and decide how critical it is. The types of breaks will determine the best method for repairing the rod.
![How-to-Fix-a-Snapped-Fishing-Rod-copy How to Fix Snapped Fishing Rod? A Quick Guide](https://reviewslists.com/wp-content/uploads/2023/05/How-to-Fix-a-Snapped-Fishing-Rod-copy-scaled.webp)
Types of breaks
There are two types of breaks, one is a clean break, and the other is a jagged break.
Clean Breaks
Clean breaks take place when the fishing rod snaps into two different parts without any splintering. This break is usually caused by a heavy weight, such as a large fish pulling on the line.
This type of break is much easier to fix as compared to jagged breaks. The determination of clean breaks is very simple when the fishing rod breaks into two different pieces with a very clean border; then you consider the clean breaks occur. The repair of a clean break is normally stronger and more durable as compared to a jagged break.
Jagged Breaks
Jagged breaks occur when the fishing rod snaps into two or more bits with rough borders. Jagged breaks can be much more difficult to repair as compared to clean breaks.
This is because the splintered borders may not fit together nicely. The parts of jagged breaks come out with rough borders, and the parts of clean breaks come out with clean borders. That is the difference between a clean break and a jagged break.
Repairing a Clean Break
A clean break can be easily repaired with the following steps:
Tools and Materials
- Fishing rod epoxy
- Sandpaper
- Rubbing alcohol
- Clamps
- Gloves
How to Fix Snapped Fishing Rod Step-by-Step Guide
Rubbing alcohol
Take some amount of rubbing alcohol and clean the broken edges of the fishing rod using rubbing alcohol.
Electrical Tape
The broken area of both pieces together and apply electrical tape around it.
Use of Heat shrink tubing
Measure the pieces of the broken area and cut a piece of heat-shrink tubing just slightly according to your measurement. Take heat shrink tubing and slide it over the broken, Remember that you should use it for covering the entire area only.
Use of heat gun
For shrinking the tubing we will use a heat gun according to the manufacturer’s instructions.
Remove electrical tape
Make sure that the tubing has cooled, After that, remove the electrical tape.
Use epoxy
After completing all steps given above, use epoxy on the broken area of the fishing rod.
Use of sandpaper:
Use sandpaper to disentangle any miscommunications.
Clamps
Use the clamps to grasp both broken ends with each other.
Test the fishing rod
Test the fishing rod to make sure that the rod is safe and more powerful.
Safety Precautions
Before using a heat gun, make sure that you wear gloves. If not, then wear gloves when you use a heat gun to save your skin from the heat. Furthermore, you work in a well-ventilated place to avoid inhaling any fumes.
Rubbing alcohol is flammable, so keeping it away from heat sources is very important. Store the rubbing alcohol in a cooled place because it is an irritating agent that may affect your skin.
Protect your skin
It is very important to wear gloves and a mask to save your skin from the chemicals.If the epoxy connects with your hands or other parts of your skin, then wash it with soap and clean water as soon as possible.
Work in a well-ventilated area
Most make sure that where you work with epoxy have a window and fan especially when you work with large amounts of epoxy.
Prevention
First, it is very important to learn how to fix a snapped fishing rod. But it is also equally important to take tips to stop future breaks from taking place. Here are some steps on how to stop fishing rod break:
Grasp your fishing rod with protection
If you are a fish lover then keep away from dropping your fishing rod, Especially when you are sitting down. Do not apply extra pressure or heavy weight on the fishing rod. This may break and damage your rod.
Save your fishing rod
Save your fishing rod in a cool place, you would not save your rod in a place in which the temperature is very high. To save a fishing rod, I will recommend you use a jacket.
Look at your fishing rod with systematic
Look at your fishing rod completely, and if you see any damage or breaks, then take action immediately
To prevent overloading of the rod:
You should understand that the capacity of the rod is capable of the size and load of the fish you are trying to catch.
Final Thoughts
How to Fix Snapped Fishing Rod? Fixing a snapped fishing rod can be a very simple process if you know what to do. Check out the damage by using a little knowledge, suitable tools, and material, these factors will take you toward a successful repair.
Furthermore, with a little care of a fishing rod, you can use it for many years and enjoy it on the water. Check the fishing rod and maintain it regularly. I will recommend you use the jacket to cover the fishing rod.
You’re so awesome! I don’t believe I have read a single thing like that before. So great to find someone with some original thoughts on this topic. Really.. thank you for starting this up. This website is something that is needed on the internet, someone with a little originality!
Useful article, thank you. Top article, very helpful.